STM32F103C8T6 with ili9341

[Vector]

Hi guys!

My name is Anton, and I am from Russia. Sorry, for my bad English.
I have a STM32F103C8T6 and display with ili9341 controller. Can someone tell me, how I can use this devices with UGFX library, FreeRTOS and Keil, please.

Anton

Edited May 29, 2017 by Vector

[Joel Bodenmann]

Hello @Vector and welcome to the µGFX community!

There is a very detailed guide that shows how to add the µGFX library to an existing Keil µVision project: https://wiki.ugfx.io/index.php/Using_Keil_µVision_5_MDK-ARM
So when  you have a Keil project with FreeRTOS that runs on your STM32 then it's just a matter of following that guide step-by-step. Make sure that you enable the FreeRTOS OS abstraction in the configuration file.

I hope that helps. Don't hesitate to ask if you have any further questions.