Driver for SSD1848 128^2 COG LCD

[czhou]

Hello Everyone,

I bought a low-end 128 * 128 COG LCD which control via SSD1848 (datasheet) chipset. I googled a while and cannot found a existing driver to support this chipset (maybe it's too lower-ending). I have to DIY one for my homemade handheld instrument project. Here comes up with a uGFX driver which build against ChibiOS/RT + STM8.

Enjoy the weekends!

Thanks,

Chenchen

board_ssd1848.h

gdisp_lld_config.h

gdisp_lld_SSD1848.c

ssd1848.h

gos_chibios.h

Edited April 16, 2016 by czhou

[Joel Bodenmann]

Hello and welcome to the community!

Thank you very much for sharing your driver. We will take a look at it and add it to the repository.
It would be great if you could post more pictures of your project once your display stuff is done. We'd really need more pictures for our demos section on the website.

[czhou]

Hi Joel,

As long as the project moving on. I will post some pictures here. uGFX is awesome! I believe there will be more projects comming in the future.

Thanks,

Chenchen

[Joel Bodenmann]

Glad to hear that! Thanks for your positive feedback!
If you're interested you can post your project in the "User Projects" section in the forum - or, if you'd like - we can give you a separate blog: https://community.ugfx.org/blogs/

In any case we'd appreciate any kind of pictures - especially if you allow us to use them in the demos section of the homepage.

[inmarket]

I have added the SSD 1848 driver to the repository (with some minor changes).

Many thanks Czhou.

[Joel Bodenmann]

@czhou Could you try the driver that's now part of the official uGFX repository and let us know whether everything works as expected?

Thank you again for your contribution! We appreciate it a lot.