Changing Driver

[DPJones]

Hi

I have used the original Psoc 5  and the ILI9341  project I have managed to change the Library from 2.6 to 2.8 I have then tried to change the ILI9341drivers to the ST7735 I am having a problem I cant compile and get this error coming up can anyone please assist? I have attached a screen shot along with my board file thanks David

board_ST7735.h

[inmarket]

Make sure you are using the latest repository version as this bug may be fixed.

If not, just add the g parameter to that call and where it is used.

I will check the repository later and if it is wrong there I will fix it.

[inmarket]

I just checked the repository and it was a problem there too. I have now fixed it in the repository.

[DPJones]

Thanks for getting back could you please point me to the repository to download the latest version?

[DPJones]

Hi again I have found the repository and loaded down the new file which has cured the g problem but I still have lots of functions that don't  work  I have attached the screen shots any help would be greatly appreciated.

[inmarket]

It appears that you have not implemented your board_ST7735.h properly as that is where those routines are defined.