mzcs
-
Posts
6 -
Joined
-
Last visited
Content Type
Forums
Store
Downloads
Blogs
Posts posted by mzcs
-
-
Thanks !
-
As I Already Wrote, Unlike Keil's MDK (In Which This Issue Appears Too...), mbed.org' Does NOT Have An Option To Exclude a File On The Project From Being Automatically Built.
Any Ideas ?
-
Alright, I've Began Adapting µGFX for mbed.org... (The Initial Config. File & Modified Files Are Attached)
At First, I'm Relaying On The Existing µGFX-FreeRTOS Port. Once I Get A Good-Working Setup, I'll Try Going For a "Real" Port - Using mbed.org' CMSIS RTOS (a.k.a. "mbed RTX").
But I Couldn't Escape The Following Linker Error (Also : Here) - Without Disabling Font Loading Altogether :
Error: Symbol mf_bwfont_DejaVuSans12 multiply defined (by mf_font.c.NUCLEO_F103RB.o and DejaVuSans12.c.NUCLEO_F103RB.o).
---
Any Ideas ?
* mbed.org' System Doesn't Have an Option To Exclude a File From Being Built (Unlike Keil' MDK - Which Built The Project Successfully After Doing Exactly That).
-
Thanks for The Warm Welcome
As Per The Discussed µGFX Port, Although It Might Take Me Quite Some Time - Being The Embedded/RT Rookie That I'm, I Might Give It a Try.
While An Alternative Route Might Be Using FreeRTOS as a "Thread Lib." & a µGFX "Interface" for mbed.org, But The New mbed v3.0, Once Released (Alpha 1 is Planned for 14/12/2014), Will Most Probably Render FreeRTOS Completely Obsolete for mbed.org Users...
Also, I Was Wondering About The µGFX for IDE File/Folder Setup : Is There Any Automated Prep. Tool for a Such a Setup... ? (Such a Tool Might Proabably Aid In Future Upgrade(s) of The µGFX Part In The Project, Too).
-
Hi There
I'm a Student Working On My Very First µC-Based Project (an ARM Cortex-M3 Based by STMicroelectronics) & I've Opted To Flatten The Initial Learning Curve By Using The Growing-Propular ARM mbed.org Development Platform...
But Altough I've Googled Quite a Bit, I Couldn't Find a Definite Answer Regarding The Existance/Lacking of a 'µGFX / ARM mbed.org' Port, Or Any Workable Setup of These.
Is There Such a Port ?
or At Least Is There a Way of Constructing Such a Workable Setup ? (Preferrably - Via The Least Amount of Manual & Error-Prone Work... Also To Aid In Future Upgrade of The µGFX Part In The Project)
Thank You
Moran Z.
ISRAEL
µGFX / ARM mbed.org Port
in Development and Feedback
Posted
Not Yet, I'm Presently Quite Loaded With Homework.