[соме adjustments if someone wants to use uGFX-2.9 with ESP32 Xtensa rtos variant]

hello gents,

AJJ: I'm glad you're making progress. I can send the configuration or whatever if you need.

Enjoy esp32 with uGFX on top

[соме adjustments if someone wants to use uGFX-2.9 with ESP32 Xtensa rtos variant]

of course ... I can try ...

[соме adjustments if someone wants to use uGFX-2.9 with ESP32 Xtensa rtos variant]

hi gents,

you could fix these minor issues if you cover them below the definition of "CONFIG_IDF_TARGET_ESP32", which is seen/visible when someone integrates uGFX into Espressif source three ... if you consider it necessary, of course ... cheers ....

[соме adjustments if someone wants to use uGFX-2.9 with ESP32 Xtensa rtos variant]

here is the Xtensa definition:

// ------------------ Critical Sections --------------------

void __attribute__((optimize("-O3"))) vPortEnterCritical(portMUX_TYPE *mux)

...

here is the regular/original rtos definition:

// ------------------ Critical Sections --------------------

void vPortEnterCritical(void)

...

hope this helps ...

[соме adjustments if someone wants to use uGFX-2.9 with ESP32 Xtensa rtos variant]

Hi, as I see it .... the mods are related to FreeRTOS used on ESP32, modified by Espressif.

[соме adjustments if someone wants to use uGFX-2.9 with ESP32 Xtensa rtos variant]

my suggestion for the fix ...

0001-WT32-SC01-Fix-for-the-xtensa-include-freertos-portma.patch

[соме adjustments if someone wants to use uGFX-2.9 with ESP32 Xtensa rtos variant]

Xtensa have had made some changes in the freertos for ESP32 . If someone is interested in uGFX-2.9 for ESP32 they should make an correction to the graphics library tree.

There are a few minor changes in the:

src/gos/gos_freertos.h

src/gqueue/gqueue.c

src/gqueue/gqueue.h

to enable ugfx window manager.

how we can discuss this and whether it is of interest ... cheers gents.

 

 

 

 

[uGFX 2.9 on WT32-SC01 3.5" with ST7796s driver]

sorry guys, forgot the most important picture

 

[uGFX 2.9 on WT32-SC01 3.5" with ST7796s driver]

Hello, thanks of course this is the idea ... i will unravel the display driver first to add acceleration if possible ... see you

another good test

[uGFX 2.9 on WT32-SC01 3.5" with ST7796s driver]

Hello guys,

I am at the very beginning of the project, but I am fascinated by the possibilities and design of the library, if anyone is also interested and working on a similar hardware, I am glad to exchange information ... congrats ..