[Arduino Compile errors]

Hello,

Version 2.9  is generating compilation errors for "ugfx_test.ino".  Atfer following "ugfx_2.9\boards\base\ArduinoTinyScreen\readme.txt" instructions (see attached file), I'm getting the following errors. I noticed the instructions are missing step 2.

 

Arduino: 1.8.6 (Windows 7), Board: "Arduino Mini, ATmega328P"

Build options changed, rebuilding all
In file included from C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.cpp:5:0:

C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.h:28:24: error: variable or field 'SSD1331_write_cmd' declared void

 void SSD1331_write_cmd(gU8 cmd);

                        ^

C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.h:28:24: error: 'gU8' was not declared in this scope

C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.h:29:25: error: variable or field 'SSD1331_write_data' declared void

 void SSD1331_write_data(gU8 data);

                         ^

C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.h:29:25: error: 'gU8' was not declared in this scope

C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.cpp:29:23: error: variable or field 'writeGPIO' declared void

 static void writeGPIO(gU8 regAddr, gU8 regData)

                       ^

C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.cpp:29:23: error: 'gU8' was not declared in this scope

C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.cpp:29:36: error: 'gU8' was not declared in this scope

 static void writeGPIO(gU8 regAddr, gU8 regData)

                                    ^

C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.cpp: In function 'void SSD1331_init_board()':

C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.cpp:45:34: error: 'writeGPIO' was not declared in this scope

  writeGPIO(GPIO_RegData,~GPIO_RES);//reset low, CS/other pins high

                                  ^

C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.cpp: In function 'void SSD1331_releasebus()':

C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.cpp:68:42: error: 'writeGPIO' was not declared in this scope

  writeGPIO(GPIO_RegData,GPIO_TRANSFER_END);

                                          ^

C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.cpp: At global scope:

C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.cpp:72:24: error: variable or field 'SSD1331_write_cmd' declared void

 void SSD1331_write_cmd(gU8 cmd) {

                        ^

C:\Users\ghost\Documents\Arduino\libraries\gfx\board_SSD1331.cpp:72:24: error: 'gU8' was not declared in this scope

Multiple libraries were found for "gfx.h"
 Used: C:\Users\ghost\Documents\Arduino\libraries\gfx
 Not used: C:\Users\ghost\Documents\Arduino\libraries\ugfx_2.9
exit status 1
Error compiling for board Arduino Mini.

 

readme.txt