Jump to content

Does SSD1963 need RD port at all?


Recommended Posts

It seems that SSD1963 does not use the RD port. I had a look at board_ssd1963_gpio.h. It defines two macros for setting and clearing this pin (Set_RD, Clr_RD), however Clr_RD is never called. Can RD simply be wired to VDD? (by the way, the UTFT library suggests wiring RD to VDD for SSD1963).

And another question: am I right to assume that palSetPad sets any pin to low and palClearPad sets it to high? I am trying to convert the driver to Teensy and I am a bit confused because the naming seems to be inverse to what it supposedly does.

Link to post
Share on other sites
Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...